Asus VK222, VK221 manual Assembling the monitor base

Page 8

1.3Assembling the monitor base

To assemble the monitor base:

1.Connect the base with the monitor. A click indicates that the base has been connected successfully.

2.Adjust the monitor to the angle that is most comfortable for you.

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

1

2

1-

Chapter 1: Product introduction

Image 8
Contents User Guide Table of contents Federal Communications Commission Statement Canadian Department of Communications StatementSafety information Conventions used in this guide Care & CleaningFollowing symptoms are normal with the monitor Where to find more information Asus websites Optional documentationPackage contents WelcomeAssembling the monitor base 1.1 VK222H/VK222U Monitor introductionFront of the LCD monitor 1.2 VK221S/VK222S 1.3 VK221D Rear connectors from left to right Rear of the LCD monitor2.1 VK222H 2.2 VK222U/VK222S/VK221S/VK221DDetaching the arm/stand for Vesa wall mount Installation instructions Adjusting the monitorInstall Life-Frame 2 software How to reconfigure OSD On-Screen Display menuOSD Function Introduction SpendidImage ColorSystem Setup Input SelectSpecifications summary For VK222 series modelsTroubleshooting FAQ Problem Possible SolutionVesa Modes IBM ModesMAC Modes VK222H Hdmi Supported Primary Timings VK222H Hdmi Supported Optional Timings