10 . System panel connector (10-1 pin FRONT_PANEL)
This connector supports several chassis-mounted functions.
Reset 
HDDLED
HDLED+
HDLED-
Ground
Reset
NC
FRONT_PANEL 
PLED+
PLED-
PWR
GND
Power Button 
Power LED
PTGD1-LA Front panel audio connector
•System power LED
This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
•Hard disk drive activity
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
•Power/Soft-off button
This connector is for the system power button. Pressing the power button turns the system ON or puts the system in SLEEP or SOFT-OFF mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.
•Reset button
This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.
2 0 | ASUS PTGD1-LA (Puffer M-UL8E) |
