6.2 Internal connectors
This section describes and illustrates the internal connectors on the motherboard.
1 . Floppy disk drive connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug).
Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5.
PIN 1
FLOPPY
NOTE: Orient the red markings on the floppy ribbon cable to PIN 1.
ASUS | 1 3 |