GT-80D QuadraDrivetm
TECHNICAL SPECIFICATIONS:
Output Power Rating | 80 watts RMS @ 5% THD 8 ohm load, 120 VAC |
|
|
Gain | 88dB, tones @ “5” @ 1kHz |
|
|
Tone Control Range |
|
Overdrive Channel |
|
Low | 24dB range @ 100Hz |
Mid | 10dB range @ 1kHz |
High | 20dB range @ 5kHz |
Clean Channel |
|
Low | 23dB range @ 100Hz |
Mid | 14dB range @ 800Hz |
High | 30dB range @ 10kHz |
|
|
Signal To Noise Ratio |
|
Overdrive Channel |
|
Solid State | 61dB |
Tube | 57dB |
Clean Channel |
|
Solid State | 81dB |
Tube | 72dB |
|
|
Input Impedance | 1M ohm |
|
|
Maximum Signal Accepted | 3V peak to peak |
|
|
Driver Tube Type | 12AX7A (1), 12AU7 (2) |
|
|
Output Device Type | MOSFETs |
|
|
Line Out Level | 0.7V RMS nominal |
|
|
Internal Speaker |
|
Size | 12” |
Type | Crate |
Magnet | 34 oz |
Voice Coil | 1.75” |
RMS Rating | 80 watts |
Impedance | 8 ohms |
|
|
Power Requirements | 115V 60Hz, 100VA |
| 100/115VAC, 50/60Hz, 100VA |
| 230VAC, 50/60Hz, 100VA |
|
|
Size and Weight | 17”H x 21.25”W x 10.75”D, 40 lbs. |
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.
The
©1997 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
P/N