IRQ -xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved]
4.5Power menu
The Power menu items allow you to change the settings for the ACPI and Advanced Power Management (APM) features. Select an item then press <Enter> to display the configuration options.
Suspend Mode | [Auto] | Select the ACPI state | |
ACPI 2.0 Support | [No] | ||
used for System | |||
ACPI APIC Support | [Enabled] | ||
Suspend. | |||
|
| ||
APM Configuration |
|
| |
Hardware Monitor |
|
|
4.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend.
Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
4.5.2 ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
4.5.3 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Programmable Interrupt Controller (APIC) mode under Advanced Configuration and Power Interface (ACPI). When enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled]
Chapter 4: BIOS setup |