Toshiba SD-5915SC, SD-5915SU To pause playback still mode, To stop playback, To remove the disc

1

2, 4

DISC SKIP

PLAY

STOP

PASUE/STEP

ENTER

/

To obtain a higher quality picture

Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD video player, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.

About		DVD		VCD		CD
The							icons on the heading bar show the playable discs for the
	DVD		VCD		CD

function described under that heading.

DVD :You can use this function with DVD video discs.

VCD :You can use this function with VIDEO CDs.

CD :You can use this function with audio CDs.

To pause playback (still mode)

Press PAUSE/STEP during playback.

PAUSE/STEPTo resume normal playback, press the PLAY button.

• The sound is muted during still mode.

To stop playback

Press STOP.

STOP

To remove the disc

Press OPEN/CLOSE and DISC SKIP to revolve the tray closewise.

OPEN/CLOSE	Remove the disc after the disc tray
	opens completely.
DISC SKIP

Be sure to press OPEN/CLOSE button to close the disc tray after you remove the disc.

	To turn the power off (To enter the standby mode)	Basic
	Press ON/STANDBY to turn the ON/STANDBY indicator	playback
	to red.
Note
Be aware that this equipment is still powered even after the
ON/STANDBY indicator turns off (standby mode) by pressing
ON/STANDBY button. To disconnect this equipment
completely from the mains power, pull out the power plug
from the wall outlet.
	About the screen saver
	If you pause a picture of a DVD video disc and leave it still
	for a long while, the screen saver of the DVD video player
	automatically appears.To turn off the screen saver, press
	PLAY button.
	Automatic Power Off function
	If the DVD video player is stopped, or the screen saver is
	engaged for approximately 20 minutes, the DVD video
	player will automatically turn itself off.

Notes:

•Remove all the discs from the DVD video player before moving from one location to another location.

•Do not move the DVD video player during playback. Doing so may damage the disc.

•Use OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the DVD video player to malfunction.

•Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player to malfunction.

•In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on- screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press STOP button on your remote control once the movie is completed.

21