Display Screen
FIREPLACE STATUS | THERMOSTAT DESIRED | |
TEMP SETTING | ||
THERMOSTAT |
| |
FLAME HEIGHT | CHILD LOCK | |
INDICATOR | ||
| ||
FAN SPEED | TRANSMISSION | |
| ||
ADJUSTABLE | INDICATOR | |
| ||
AUXILIARY | LOW BATTERY | |
ADJUSTABLE | INDICATOR | |
OUTPUT (ON/OFF) |
| |
| FUNCTION LEVEL | |
| INDICATOR | |
| ROOM TEMP | |
| DISPLAY | |
TIMER DISPLAY/FUNCTION |
| |
Figure 12.12 RC300CE Display Screen | ||
Function Buttons
Use POWER button to turn the unit on and off.
Menu | Use MENU button to display the menu functions. | |
Only functions that can be activated will be | ||
| ||
| displayed. For example: Flame Height will not | |
| be displayed when the remote status is OFF. | |
Select | Use the SELECT button to select the current | |
| feature. | |
V | Use the UP and DOWN arrows to toggle | |
through the menu functions and value selec- | ||
V | ||
tions in the submenus. |
Idle When Remote is in ON Mode
The remote control will go into an idle mode if no but- tons are pressed within 5 seconds. Press any button to resume full functionality. In idle mode only active func- tions will show on the screen.
Standby mode
The remote control will go into a standby mode if no but- tons are pressed within 5 minutes. Press the POWER button to reactivate the remote control to ON mode. Ac- tive functions will be displayed
Heat & Glo • | 61 |
