HP LD4200, LD4700 manual Selecting An Aspect Ratio Mode, Component

Icon	Main Menu	Submenu	Description
		Key Lock	Sets up the monitor so that it can only be used with the remote
			control. This feature can prevent unauthorized viewing.
		ISM Method	Avoids allowing a fixed or burn-in image to remain on the
			screen for a long period of time.
		Power Indicator	Sets the power indicator on the front of the monitor to On or
			Off.
		DPM (Display	Turns the power saving mode on or off.
		Power
		Management)
		Select
		Tile Mode	Enlarges the screen and is also used with several products to
			view the screen. To use this function, it:
			● must be displayed with several other products.
			● must be in a function that can be connected to RS232C
			or RGB Out.
		Factory Reset	Select this option to return to the default factory settings.
	Information	Set ID	Assigns a unique Set ID number (name assignment) to each
			product when several products are connected for display.
			Specify the number (1 ~ 99) using the up and down buttons
			and exit. Use the assigned Set ID to individually control each
			product using the Product Control Program.
		Serial No	Displays the serial numbers of the product.
		SW Version	Displays the software version.

Selecting An Aspect Ratio Mode

The aspect ratio modes available for your selection depends on the current input source. Use the following table to determine which mode is available for your monitor.

ARC \ Mode	AV	Component	HDMI/DVI		RGB
			DTV	PC	PC
16:9	X	X	X	X	X
Just Scan		X	X
Original	X
4:3	X	X	X	X	X
1:1				X	X
14:9	X
Zoom1	X
Zoom2	X

28 Chapter 4 Operating the Monitor ENWW