Heat & Glo LifeStyle VRT-BZ-N-AUB D. Vent Components Diagrams continued, DVP-FBHT SLP90 SL-2DVP

D. Vent Components Diagrams (continued)

Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm to 184 mm) thick. If wall thickness is less than 4 in. (102 mm) the existing heat shields must be field trimmed. If wall thickness is greater than 7-1/4 in. (184 mm) a DVP-HSM-B will be required.

8 in. (203 mm)

Heat

Shield

15-1/8 in.

(384 mm)

	Max
12 in.	Effective
(305 mm)	Length

SLP-TRAP2

Horizontal Termination Cap

Term Cap	Minimum	Maximum
	Effective Length	Effective Length
Trap2	5-1/4 in.	9-1/4 in.
	133 mm	235 mm

DVP-FBHT

SLP90 SL-2DVP

SLP-TVHW

Vertical

Termination Cap

			7-1/4 in.
	DVP-FBHT	1 in.	(184 mm)
FireBrickTermination Cap		(25 mm)

14 in.

(356 mm)

3/8 in. (10 mm) 1 in. (25 mm)

7-3/4 to 10-3/8 in.

(197 to 264 mm)

Figure 14.4 SLP Series Vent Components

Heat & Glo • VRT-AUB • 2123-980 Rev. H • 5/12 71