1.10.2Internal connectors
1.Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.
• Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.
•The floppy disk drive singal cable is purchased separately.
FLOPPY
PIN1
NOTE:Orient the red markings
on the floppy ribbon cable to PIN 1.
2.Digital Audio connector (4-1 pin SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound output. Connect one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF module.
+5V | SPDIFOUT GND |
SPDIF_OUT
P5Q-EM DO Digital audio connector
The S/PDIF out module is purchased separately.
Chapter 1: Product introduction |
12/9/08 12:34:23 PM