Asus P5Q-EM DO manual User Access Level Full Access, Change User Password, Clear User Password

After you have set a supervisor password, the other items appear to allow you to change other security settings.

BIOS SETUP UTILITY

		Boot
Security Settings			<Enter> to change
Supervisor Password	: Not Installed		password.
			<Enter> again to
User Password	: Not Installed		disabled password.
Change Supervisor Password
User Access Level	[Full Access]
Change User Password
Clear User Password
Password Check	[Setup]

User Access Level [Full Access]

This item allows you to select the access restriction to the Setup items. Configuration options: [No Access] [View Only] [Limited] [Full Access]

No Access prevents user access to the Setup utility.

View Only allows access but does not allow change to any field.

Limited allows changes only to selected fields, such as Date and Time.

Full Access allows viewing and changing all the fields in the Setup utility.

Change User Password

Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a User Password:

1.Select the Change User Password item and press <Enter>.

2.On the password box that appears, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you set your password successfully. To change the user password, follow the same steps as in setting a user password.

Clear User Password

Select this item to clear the user password.

Password Check [Setup]

When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: [Setup] [Always]

2-38 Chapter 2: BIOS setup

P5Q-EM DO.indb 38

12/9/08 12:36:09 PM