Asus P5Q-EM DO manual Intel ME configuration, To open the Intel ME Setup, Change Intel ME password

2.10Intel® ME configuration

This function allows you to configure the Intel® Management Engine (ME) settings.

Ensure that the ME function is enabled before configuring the settings. To enable the ME function, refer to pages 1-26 and 2-24 for details.

To open the Intel® ME Setup

The following screen appears after the Power-On-Self-Test (POST). Press <Ctrl> + P to launch the Intel® ME Setup screen.

Intel(R) Management Engine BIOS Extension v5.0.5.0001

Copyright(C) 2003-08 Intel Coporation. All Rights Reserved.

Intel(R) ME Firmware version 5.0.0.1098

Press <CTRL-P> to enter Intel(R) ME Setup.

2.10.1Change Intel® ME password

You are required to change the password when entering the setup for the first time. By default , the password is admin.

To change the password:

1.Key in admin in the Intel(R) ME Password area, then press <Enter>.

2.Key in a new password in the Intel(R) ME New Password area and press <Enter>.

3.Key in the password again in the Verify Password area and press <Enter>.

A valid password must include uppercase and lowercase letters, special characters (such as ~,%,*,#), and numbers.

Intel(R) Management Engine BIOS Extension v5.0.5.0001

Copyright(C) 2003-08 Intel Coporation. All Rights Reserved.

	[ MAIN MENU ]
	Intel(R) ME Configuration
	Change Intel(R) ME Password
	Exit
[ESC]=Exit	[Enter]=Access

Intel(R) ME Password

ASUS P5Q-EM DO 2-41

P5Q-EM DO.indb 41

12/9/08 12:36:13 PM