Asus D2X user manual Is to open the Audio Options window from, Options tab, Time

	No	Item	Description
1		Audio Options	Step 1 is to open the “Audio Options” window from the
			Options tab.
	2	Driver Mode	Step 2 is to select “ASIO” as the driver mode in Advanced
			tab. (WDM and MME are Windows driver types) The
			changes will take effect after you restart the program next
			time.

3

Playback Timing Master

After step 2, Sonar LE will display 4 output drivers: “ASUS Xonar D2X ASIO Out -00~06”. Make sure you are using 00 or another one.

4

5

6

7

Recording Timing	After step 2, Sonar LE will display 1 input driver: “ASUS
Master	Xonar D2X ASIO In -00”. Make sure you are using it.
Sample Rate	Step 5 is to select the default file sample rate (44.1, 48, 96,
	or 192KHz) for your Sonar project.
Bit-depth	Step 6 is to select the default file bit-depth (16/24bit) for your
	project.
ASIO Panel	If you would like to configure bit-depth (16/24bit) and latency
	(1ms~300ms) of the Xonar D2X ASIO driver, click this ASIO
	panel to reset them. The changes will take effect the next
	time you start the program.

For other applications that support ASIO, such as WaveLab, Cubase, Reason, Winamp, etc, the setup will be very similar to the above.

54 ASUS Xonar D2X