2.6.2 | Boot Settings Configuration |
| |
Boot Settings Configuration |
| Allows BIOS to skip | |
Quick Boot | [Enabled] | certain tests while | |
booting. This will | |||
Full Screen Logo | [Enabled] | decrease the time | |
AddOn ROM Display Mode | [Force BIOS] | needed to boot the | |
Bootup | [On] | system. | |
PS/2 Mouse Support | [Auto] |
| |
Wait For ‘F1’ If Error | [Enabled] |
| |
Hit ‘DEL’ Message Display | [Enabled] |
| |
Interrupt 19 Capture | [Disabled] |
|
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo™ feature.
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse. Configuration options: [Disabled] [Enabled] [Auto]
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]
Chapter 2: BIOS setup |