Asus WL-160N user manual Config Advanced, Others, RTS Threshold, Fragmentation Threshold

Page 18

Chapter 3 Software Reference

Chapter 3 - Software Reference

Others

Encryption – Click this link to show the "Encryption" tab.

Advanced – Click this link to show the "Advanced" tab. In most cases, the default values do not have to be changed.

Troubleshooting – Click on this to show the Troubleshooting utility.

Config - Advanced

Click Advanced link on Config-Basic page to show this tab. This tab allows you to set up additional parameters for the wireless Adapter. We recommend using the default values for all items in this window.

RTS Threshold (0-2347)

The RTS/CTS (Request to Send/Clear

to Send) function is used to minimize collisions among wireless stations. When RTS/CTS is enabled, the router refrains from sending a data frame until another RTS/CTS handshake is completed. Enable RTS/CTS by setting a specific packet size threshold. The default value (2346) is recommended.

Fragmentation Threshold (256-2346)

Fragmentation is used to divide 802.11 frames into smaller pieces (fragments) that are sent separately to the destination. Enable fragmentation by setting a specific packet size threshold. If there is an excessive number of collisions on the WLAN, experiment with different fragmentation values to increase the reliability of frame transmissions. The default value (2000) is recommended for normal use.

18	ASUS WLAN Adapter

Image 18

Contents Wireless Local Area Network Adapter WL-160N Copyright Information Asus Computer GmbH Germany & Austria ASUSTeK Computer INCAsus Computer International America Technical supportTable of Contents Package contents FeaturesInstalling the Wlan utilities and driver System RequirementsReading the Wlan status indicators Connected to wireless deviceNo wireless connection One Touch Wizard Configuring with the Wlan utility Infrastructure Installation ChapterConfiguring with the Wlan utility Ad Hoc Asus Wlan Control Center Using the Control CenterWireless Status Icons on the taskbar Starting the Control CenterWireless Radio Off Click to turn Taskbar Icon Launch Wireless SettingsWireless Radio On Click to turn Taskbar icon Right-click menuStarting Wireless Settings Status StatusAssociation State Buttons Status Connection Status IP Config Status PingButton Network Name Ssid Config BasicNetwork Type ChannelRTS Threshold Config AdvancedOthers Fragmentation ThresholdConfig Encryption Network AuthenticationData encryption Wireless Network KeyWireless Network Key WEP Key FormatSelect one as your Default Key 64/128bits versus 40/104bitsConfig Authentication Survey Site SurveyAbout Version Info Exit Wireless Settings Link StateWindows XP Wireless Options Only use Windows wireless functionSoftware Reference Windows Vista Wireless Options Verify if the Wlan Adapter is installed correctly Cannot connect to any access pointsBad link quality or bad signal strength TCP/IP protocol did not bind to the Wlan PC AdapterAd Hoc Access Point APBasic Service Area BSS Basic Rate SetDevice Name Default KeyDhcp Dynamic Host Configuration Protocol DNS Server Address Domain Name SystemExtended Service Set ESS Essid Extended Service Set IdentifierEncryption Gateway EthernetFirewall IeeeIeee 802.11b 11Mbits/sec Ieee 802.11gInfrastructure IP Internet Protocol ISP Internet Service ProviderMAC Address Media Access Control IP AddressPass Phrase Ssid Service Set IdentifierPacket PPP Point-to-Point ProtocolWlan Wireless Local Area Network Weca Wireless Ethernet Compatibility AllianceWPA Wi-Fi Protected Access TCP Transmission Control ProtocolSafety Information FCC Warning StatementProhibition of Co-location Declaration of Conformity for R&TTE directive 1999/5/EC CE Mark Warning