Asus WL-160N user manual One Touch Wizard

Page 8

Chapter 2 - Installation

One Touch Wizard

Use One Touch Wizard to setup your wireless connection with an existing wireless LAN.

Chapter 2

Installation

1.Launch One Touch Wizard from Start menu and click Next to set up your wireless network.

2.Select an AP from the Available Networks field, then click Next.

3.Connection is complete. Click Next to setup the IP address for the WLAN Adapter.

4.Choose to obtain an IP address or to assign static address manually for your WLAN Adapter. When IP setting is complete, click Finish to exit the One

Touch Wizard.

Note: If the access point you want to connect has set up encryption policies, you must configure the same encryption on your WLAN Adapter. Select "Configure your wireless LAN settings" radio button in step 2 and make the settings accordingly. When the encryption settings are complete, you can launch the One Touch Wizard once again from the Start menu to set up the connection with your AP.

We suggest WL-160N work with WL-500W Super Speed N wireless router for maximum performance. Make sure the router firmware is the updated. Check ASUS website for router latest updated firmware.

ASUS WLAN Adapter

Image 8

Contents Wireless Local Area Network Adapter WL-160N Copyright Information ASUSTeK Computer INC Asus Computer International AmericaAsus Computer GmbH Germany & Austria Technical supportTable of Contents Package contents FeaturesInstalling the Wlan utilities and driver System RequirementsNo wireless connection Reading the Wlan status indicatorsConnected to wireless device One Touch Wizard Configuring with the Wlan utility Infrastructure Installation ChapterConfiguring with the Wlan utility Ad Hoc Using the Control Center Wireless Status Icons on the taskbarAsus Wlan Control Center Starting the Control CenterTaskbar Icon Launch Wireless Settings Wireless Radio On Click to turnWireless Radio Off Click to turn Taskbar icon Right-click menuAssociation State Starting Wireless SettingsStatus Status Buttons Status Connection Button Status IP ConfigStatus Ping Config Basic Network TypeNetwork Name Ssid ChannelConfig Advanced OthersRTS Threshold Fragmentation ThresholdConfig Encryption Network AuthenticationWireless Network Key Wireless Network Key WEPData encryption Key FormatSelect one as your Default Key 64/128bits versus 40/104bitsConfig Authentication Survey Site SurveyAbout Version Info Exit Wireless Settings Link StateWindows XP Wireless Options Only use Windows wireless functionSoftware Reference Windows Vista Wireless Options Verify if the Wlan Adapter is installed correctly Cannot connect to any access pointsBad link quality or bad signal strength TCP/IP protocol did not bind to the Wlan PC AdapterAccess Point AP Basic Service Area BSSAd Hoc Basic Rate SetDefault Key Dhcp Dynamic Host Configuration ProtocolDevice Name DNS Server Address Domain Name SystemEncryption Extended Service Set ESSEssid Extended Service Set Identifier Ethernet FirewallGateway IeeeInfrastructure Ieee 802.11b 11Mbits/secIeee 802.11g ISP Internet Service Provider MAC Address Media Access ControlIP Internet Protocol IP AddressSsid Service Set Identifier PacketPass Phrase PPP Point-to-Point ProtocolWeca Wireless Ethernet Compatibility Alliance WPA Wi-Fi Protected AccessWlan Wireless Local Area Network TCP Transmission Control ProtocolProhibition of Co-location Safety InformationFCC Warning Statement Declaration of Conformity for R&TTE directive 1999/5/EC CE Mark Warning