Asus WL-160N Encryption, Extended Service Set ESS, Essid Extended Service Set Identifier

Page 32

Chapter 5 Glossary

Chapter 5 - Glossary

Direct-sequence systems communicate by continuously transmitting a redundant pattern of bits called a chipping sequence. Each bit of transmitted data is mapped into chips and rearranged into a pseudorandom spreading code to form the chipping sequence. The chipping sequence is combined with a transmitted data stream to produce the output signal.

Wireless mobile clients receiving a direct-sequence transmission use the spreading code to map the chips within the chipping sequence back into bits to recreate the original data transmitted by the wireless device. Intercepting and decoding a direct- sequence transmission requires a predefined algorithm to associate the spreading code used by the transmitting wireless device to the receiving wireless mobile client.

This algorithm is established by IEEE 802.11b specifications. The bit redundancy within the chipping sequence enables the receiving wireless mobile client to recreate the original data pattern, even if bits in the chipping sequence are corrupted by interference. The ratio of chips per bit is called the spreading ratio. A high spreading ratio increases the resistance of the signal to interference. A low spreading ratio increases the bandwidth available to the user. The wireless device uses a constant chip rate of 11Mchips/s for all data rates, but uses different modulation schemes to encode more bits per chip at the higher data rates. The wireless device is capable of an 11 Mbps data transmission rate, but the coverage area is less than a 1 or 2 Mbps wireless device since coverage area decreases as bandwidth increases.

Encryption

This provides wireless data transmissions with a level of security. This option allows you to specify a 64-bit or a 128-bit WEP key. A 64-bit encryption contains 10 hexadecimal digits or 5 ASCII characters. A 128-bit encryption contains 26 hexadecimal digits or 13 ASCII characters.

64-bit and 40-bit WEP keys use the same encryption method and can interoperate on wireless networks. This lower level of WEP encryption uses a 40-bit (10 hexadecimal digits assigned by the user) secret key and a 24-bit Initialization Vector assigned by the device. 104-bit and 128-bit WEP keys use the same encryption method.

All wireless clients in a network must have identical WEP keys with the access point to establish connection. Keep a record of the WEP encryption keys.

Extended Service Set (ESS)

A set of one or more interconnected basic service set (BSS) and integrated local area networks (LANs) can be configured as an Extended Service Set.

ESSID (Extended Service Set Identifier)

You must have the same ESSID entered into the gateway and each of its wireless clients. The ESSID is a unique identifier for your wireless network.

32

ASUS WLAN Adapter

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Wireless Local Area Network Adapter WL-160N Copyright Information ASUSTeK Computer INC Asus Computer International AmericaAsus Computer GmbH Germany & Austria Technical supportTable of Contents Package contents FeaturesInstalling the Wlan utilities and driver System RequirementsNo wireless connection Reading the Wlan status indicatorsConnected to wireless device One Touch Wizard Configuring with the Wlan utility Infrastructure Installation ChapterConfiguring with the Wlan utility Ad Hoc Using the Control Center Wireless Status Icons on the taskbarAsus Wlan Control Center Starting the Control CenterTaskbar Icon Launch Wireless Settings Wireless Radio On Click to turnWireless Radio Off Click to turn Taskbar icon Right-click menuAssociation State Starting Wireless SettingsStatus Status Buttons Status Connection Button Status IP ConfigStatus Ping Config Basic Network TypeNetwork Name Ssid ChannelConfig Advanced OthersRTS Threshold Fragmentation ThresholdConfig Encryption Network AuthenticationWireless Network Key Wireless Network Key WEPData encryption Key FormatSelect one as your Default Key 64/128bits versus 40/104bitsConfig Authentication Survey Site SurveyAbout Version Info Exit Wireless Settings Link StateWindows XP Wireless Options Only use Windows wireless functionSoftware Reference Windows Vista Wireless Options Verify if the Wlan Adapter is installed correctly Cannot connect to any access pointsBad link quality or bad signal strength TCP/IP protocol did not bind to the Wlan PC AdapterAccess Point AP Basic Service Area BSSAd Hoc Basic Rate SetDefault Key Dhcp Dynamic Host Configuration ProtocolDevice Name DNS Server Address Domain Name SystemEncryption Extended Service Set ESSEssid Extended Service Set Identifier Ethernet FirewallGateway IeeeInfrastructure Ieee 802.11b 11Mbits/secIeee 802.11g ISP Internet Service Provider MAC Address Media Access ControlIP Internet Protocol IP AddressSsid Service Set Identifier PacketPass Phrase PPP Point-to-Point ProtocolWeca Wireless Ethernet Compatibility Alliance WPA Wi-Fi Protected AccessWlan Wireless Local Area Network TCP Transmission Control ProtocolProhibition of Co-location Safety InformationFCC Warning Statement Declaration of Conformity for R&TTE directive 1999/5/EC CE Mark Warning
Top Page Image Contents