Installation Wizard Screen (continued)
Network Settings -
Here users can configure the Network Settings for the camera. Enter the IP address, Subnet mask, Default router IP, Primary DNS, and Secondary DNS. Automatically, the option to reset IP address at boot is selected. If you would like to save your IP address settings, make sure to uncheck this box. These settings can also be configured on the
Advanced > Network screen (page 36) when configuring the camera via a Web Browser.
Click Next and then Apply to save the configured settings. Users can click Previous to modify changes or mistakes.
Upgrade -
The upgrade window allows users to upload a saved firmware file. If the firmware is older than that currently on the camera, a screen will appear indicating so and prompting the user to confirm the upload.
Package Information -
This displays information about the firmware and plugin currently installed on the camera.
16