Using IP surveillance Software (continued)
Monitor Program (continued)
Changing the Camera Order in the List
You can apply “drag and drop” in the grid area of the camera list to change the sequence of the connected Network Cameras, which is shown below. This will enable you to rearrange the camera order of your choice. Once the camera is moved to a specified location, the proceeding cameras will then move 1 position up or 1 position down depending on which direction the selected camera was moved.
Step 1: | Step 2: |
Press the left mouse button at the gray index field.
Move the mouse to your new selected location and release the mouse button. Then Video 1 will be moved (to the 12th row in this example).
Once you click the “Save” button in the
NOTE: If you change the remote settings of the network cameras in the right webpage of this window, you need to apply the “SAVE” button in each corresponding page in order to save the settings to the cameras. There are different “SAVE” buttons for changing the settings of the local IP surveillance system and the remote Video Server / Network Camera series product respectively.
82