Dell E7240 owner manual Installing the Display Assembly, Removing the System Fan

Installing the Display Assembly

1.Insert the LVDS and wireless antenna cables through the holes on the base chassis and connect them.

2.Place the display assembly onto the computer.

3.Tighten the screws on both sides to secure the display assembly.

4.Tighten the screw that secures heatsink to the computer.

5.Route and connect the LVDS cables through the routing channel.

6.Connect the WLAN cable to the computer.

7.Install:

a.palmrest

b.keyboard

c.base cover

d.SD card

e.battery

8.Follow the procedures in After Working Inside Your Computer.

Removing the System Fan

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.battery

b.SD card

c.base cover

d.keyboard trim

e.keyboard

f.palmrest

g.display-hinge cover

3.Remove the screws that secure the system fan to the computer and lift the system fan. Disconnect the system fan cable and lift the fan from the computer.