Option | Description | |
|
| |
| • Disabled - Does not allow the system to power on by special LAN | |
|
| signals when it receives a |
|
| LAN. (Default Setting) |
| • LAN Only - Allows the system to be powered on by special LAN | |
|
| signals. |
| • | WLAN Only |
| • | LAN or WLAN |
| • LAN with PXE Boot | |
Block Sleep | Allows you to block the computer from entering into the sleep state. | |
| Option is disabled by default. | |
| • | Block Sleep (S3) |
Peak Shift | Peak Shift can be used to minimize AC consumption during peak powers | |
| times of day. Set the start and end time to run in Peak Shift mode. | |
| • Enable Peak Shift (Disabled) | |
Advanced Battery Charge | Allows batteries in the system in Advanced Battery Charge Mode to | |
Configuration | maximize battery health. This uses standard charging algorithm and | |
| other techniques during | |
| • Enable Advanced Battery Charge Mode(Disabled) | |
Primary Battery | Allows you to define how to use the battery charge, when AC is plugged | |
Configuration | in. The options are: | |
| • | Adaptive(Enabled) |
| • | Standard Charge |
| • | Express Charge |
| • | Primary AC Use |
| • Custom Charge — you can set the percentage to which the battery | |
|
| must charge. |
Intel Smart Connect | The option is disabled by default. If option enables will periodically sense | |
Technology | nearby wireless connection while the system is asleep. It will synchronize | |
| emails or social media application that were open when system entered | |
| the sleep state. | |
| • | Smart Connection(Disabled) |
Table 9. POST Behavior |
|
|
|
| |
Option | Description | |
|
| |
Adapter Warnings | Allows you to activate the adapter warning messages when certain | |
| power adapters are used. The option is enabled by default. | |
| • | Enable Adapter Warnings |
Keypad (Embedded) | Allows you to choose one of two mode it enable the keypad that us | |
| embedded in the internal keyboard. | |
| • | Fn Key Only |
| • | By Numlock |