Installing StorNext Client Software on Sun Solaris
Use this procedure to install StorNext software on a Solaris client.
1Log on as root.
2Install the client software. Type:
tar xf <filename> pkgadd
Select to add the package ‘ADICsnfs’ type y (yes, add the package)
type q (quit the pkgadd program)
Where <filename> is the name of the client installation program.
3Make sure the /<usr>/cvfs/config/fsnameservers file contains the name of the StorNext server.
4Create the mount points for the file systems.
mkdir -p <mount point> chmod 777 <mount point>
5Add the following line to the /etc/vfstab file to enable automount after reboot.
<file system name> - <mount point> cvfs - auto verbose=yes
where <file system name> is the name of the file system and <mount point> is the mount point specified during the Add File System step of the StorNext software configuration. For more information, refer to Step 2: Adding File Systems on page 28.
Note | To manually mount a file system, type this command: | |
mount | ||
|
StorNext File System and Storage Manager Installation Guide | 93 |