Installing StorNext Client Software on SGI IRIX
Use this procedure to install StorNext software on an IRIX client.
1Log on as root.
2Install the client software. Type: tar xf <filename>
inst -f . Inst> go Inst> quit
Where <filename> is the name of the client installation program.
3Enable StorNext to start automatically on reboot. Type:
chkconfig cvfs on chkconfig verbose on
4Make sure the /<usr>/cvfs/config/fsnameservers file contains the name of the StorNext server.
5Create the mount points for the file systems. Type: mkdir
chmod 777 <mount point>
6Add the following line to the /etc/fstab file to enable automount after reboot. Type:
<file system name> <mount point> cvfs verbose=yes 0 0
where <file system name> is the name of the file system and <mount point> is the mount point specified during the Add File System step of the StorNext software configuration. For more information, refer to Step 2: Adding File Systems on page 28.
7Reboot the client to rebuild the UNIX kernel.
Note | To manually mount a file system, type the following command: | |
mount | ||
|
96 | Installing StorNext Client Software |