10On the Complete Add Media Task screen, click Next to finish adding the media, or Back to make changes. After the process completes successfully and the Complete Add Media Task screen is shown again, do one of the following:
•Add more media. Click Next to repeat the Add Media procedure (Step 1 on page 54).
•Click Done to finish the Adding Media procedure. The Configuration Wizard screen (Figure 3 on page 23) is shown with a Completed status next to Step 5. Continue with Step 6: Adding Secondary Storage Disks.
Step 6: Adding Secondary Storage Disks
StorNext allows you to specify a file system to use as a storage disk. Storage disks, when defined, become a media type available for use in storage policies as a destination target just like tape media types. This portion of the Configuration Wizard allows you to specify the name of the file system you want to use as a storage disk.
The Storage Disk - Introduction screen shows currently configured storage disks and their mount points.
1Do one of the following:
•Click Next to add a storage disk.
•Select Skip to Add Policy Class and follow the procedure in Step 7: Adding a Storage Policy on page 61. (You would want to skip the steps for adding a storage disk if a suitable storage disk is already configured and its name appears in the list of Current Storage Disks.)
58 | Configuring StorNext |