ADIC 2.2 manual Obtain License for Linux Server, Snpc4 localhost.localdomain localhost # bad

SNFS

Step 10 Return to Step 1 to install StorNext FS on another Linux machine.

Obtain License for Linux Server

The StorNext FS server must have a valid license. To obtain the license file:

Step 1 Verify that /etc/hosts has a proper entry for the system name.

NOTE	In certain situations, the Linux installation program attaches the system name to
	127.0.0.1, instead of an entry for the Ethernet card. The following example
	illustrates this situation for /etc/hosts with the system name, snpc4:
	127.0.0.1 snpc4 localhost.localdomain localhost # bad
	If this situation occurs, StorNext FS will not work properly. To correct the /etc/hosts
	entry, edit the file so that the system name is attached to the Ethernet card. For
	example, if the IP address for the system name, snpc4, is 172.16.50.39, the host
	file should read:
	127.0.0.1 localhost.localdomain localhost 172.16.50.39 snpc4 # good

Step 2 Run the StorNext FS host identifier utility on the server. Enter:

# usr/cvfs/bin/cvfsid

Output from this utility for system name snpc4 looks similar to this.

E0290E3F83 linux 0 snpc4

The hexadecimal number is unique to the server and host_name should match the server’s host name. This number is known as the ID string.

Step 3 Email the ID string, number of client machines to ATAC at support@adic.com and product serial number to ATAC at support@adic.com. If you do not have email access, contact ATAC at 1-800-827-3822.

An ATAC Technical Support representative will provide a license.dat file.

Step 4 Place license.dat in the /usr/cvfs/config directory on the server.

NOTE	If you have a temporary StorNext license, first remove the temporary license file
	before replacing it with the permanent license file.

Setting Up StorNext FS on Linux 5-11