SNFS
Examples of stripe groups appear in the configuration file.
•Find the stripe group named RegularFiles.
•Edit the Node entries so that all the disk names are listed, with each entry followed by a space and then the stripe order number (0, 1, 2, etc.).
For example:
[StripeGroup RegularFiles]
Status UP
Read Enabled
Write Enabled
StripeBreadth 16
Node CvfsDisk12 0
Node CvfsDisk13 1
Step 3 Save the configuration file.
NOTE | Make sure you have a <file_system_name>.cfg file for each uniquely named |
| StorNext File System on the StorNext FS server. |
Step 4 Launch the StorNext FS software. Enter:
/etc/init.d/cvfs start
Step 5 Initialize each StorNext FS.
Once this command has been executed, all data on the file system CAUTION will be lost. Do not initialize the file system until you are ready to
proceed.
For example:
#cd /usr/cvfs/bin/cvmkfs_projA
Step 6 Create the file system list (fsmlist). Enter:
#cd /usr/cvfs/config
#cp ../examples/fsmlist.example ./fsmlist