Attaching Media
Note: The HBA will not allow normal data transmission on an optical link unless it is connected to another similar or compatible laser product (that is, multimode to multimode.)
Use multimode fiber optic cable, with
Table 3: Media Specifications
Fiber Optic Cable | Maximum Length | Minimum Length | Connector |
|
|
|
|
|
|
|
|
62.5/125 ∝m (multimode) | 300 meters at 1.0625 Gb/s | .5 meters | LC |
200 MHz*km bandwidth | 150 meters at 2.125 Gb/s |
|
|
cable | 70 meters at 4.25 Gb/s |
|
|
|
|
|
|
50/125 ∝m (multimode) | 500 meters at 1.0625 Gb/s | .5 meters | LC |
500 MHz*km bandwidth | 300 meters at 2.125 Gb/s |
|
|
cable | 150 meters at 4.25 Gb/s |
|
|
|
|
|
|
To attach media to the HBA:
1. Connect the fiber optic cable to the LC connectors on the HBA.
Figure 3: Connecting Fiber Optic Cables
2. Connect the other end of the cable to the Fibre Channel device.
After the media is connected to the HBA, you are ready to apply power to the computer.
LPe11002 Hardware Installation Manual | Page 5 |