Configuration

Table of Contentssections 1234

Adding Another Adapter to the Network

Resetting to Factory Defaults

1.If the default network password has been changed, a new Adapter will have to load the new password before it can join the network..

2.Press the “Encryption” button on an encrypted unit for more than 1 second, but less than three seconds..

3.Within two minutes, press the “Encryption” button on the new unit for more than 1 second, but less than three seconds..

4.The new device has now been loaded with the network password and added to the current powerline network..

Using a pointed object, press and hold the “Reset” button for one second to restore defaults.. This procedure resets the network password to the default out-of-box value..

Gigabit Powerline HD Networking Adapter