ADC ISDN NT11010 manual Specifications

Page 23

C H A P T E R

5 Specifications

Table 6—Specifications

Parameter	Specification
Physical	Height - 1.3"
	Width - 3.9"
	Depth - 5.7"
	Weight - 1.0 lb.

Environment	Complies with AT&T Pub. 62310.
Operating temperature	0°C to 60°C (32 °F to 140°F)
Storage temperature	-25°C to 60°C (-13°F to 140°F)
Relative humidity	0% to 95% noncondensing

Power	+7.5 VDC with 1W dissipation
	Provides automatic lightning and surge
	protection for the S/T and U interfaces
Power adapter option	Provides power to the NT1 only

Network Interface	Automatic ANSI maintenance functions
Line	Two-wire, full duplex
Data rate	144 kbps available to customer
Line code	2B1Q per ANSI T1.601, 1992
O/P amplitude	2.5V, zero-to-peak
Connector	One RJ45 or one RJ11

15

Image 23

Contents Isdn NT1 Page Iii Document printing historyImportant safety information Disclaimer of warranty and limitation of remedies Warranty informationLimitation of warranty Page Contents Page Who to call for assistance PrefaceWho is this manual for? Page Introduction 1010 NT1 physical dimensionsPage Front panel LEDs Setting up your hardwarePower LED Taking inventoryLoopback LED U LEDRear panel Installing your unitT interface RJ45 connector pin assignments Pin Function Dip switch pin assignments Switch Function Off Power connectorDIP switch setting Power connector pin assignments Pin FunctionInternal jumper settings Wiring diagram Wiring instructionsWall mounting instructions Power sourcePage End of Passive Bus P-P T bus configurationExtended Passive Bus Cluster Multipoint Specifications SpecificationsFCC compliance information