Black Box ACR1000A-CTL manual Dashboard Settings, Login Required, Grant All Users Exclusive Access

Page 21

Chapter 3: Installation

4.4.2 Dashboard > Settings Page

Click the Settings option below the Dashboard tab.

Most global configuration options for the ServSwitch iPATH system are available in the settings page. For configuration options that affect individual receivers, users and channels, see the sections dealing with those tabs.

Check For Updates - If this setting is off, ServSwitch iPATH will never attempt to connect to the update server to check for updates. If it is on, the first time the ServSwitch iPATH admin section is visited each day, an online check takes place. This check is only ever performed once per day. If new ServSwitch iPATH software has been released, the Version number at the top right of the page will now contain a link, allowing automatic upgrade of ServSwitch iPATH. See Dashboard > Updates page for further details.

Note: For the ServSwitch iPATH unit to successfully locate and use updates it requires access to the Internet, usually via the second Ethernet connection to the rear of the unit. The IP address for the second Ethernet connection can be configured within the Settings page.

4.4.2.1 Login Required

Determines whether a login is required to use ServSwitch Agility receivers. This is a global setting that applies to all receivers but which can be overridden for specific receivers or receiver groups. Options are:

•No: Anyone can use a receiver without login credentials, using the channels granted to the “Anonymous User” (set further down the page).

•Yes: Users need to login to use a receiver.

Note: Within ServSwitch iPATH, Login requirements filter down from the top (i.e. from this setting), but can be overridden at lower levels, such as at the Receiver or Receiver Group levels. See The Receivers Tab section for more details.

4.4.2.2 Grant All Users Exclusive Access

Determines whether a user can connect to a channel exclusively and thus prevent any other users from also connecting to that channel. If not set, users can only connect in view-only mode or shared mode. Settings that are applied specifically to a user will override settings applied to user groups they’re in, which in turn override this global setting.

Note: If a user has exclusive mode granted or NOT granted at user level, then it doesn’t matter what settings there are above (usergroups or global).

•If a user is set to inherit “allow exclusive mode” from their user groups, if any one of their user groups has “allow exclusive mode” granted, then the user will have it granted, even if the rest of the user’s usergroups have exclusive mode not granted.

•If a user is set to inherit “allow exclusive mode” from their user groups, and one of the user groups is set to inherit from the global setting - if that global setting is “allow exclusive mode,” then effectively the user group is “allow exclusive mode,” so the user will be allowed exclusive mode.

4.4.2.3 Allowed Connection Modes

Determines the global setting that will be applied to all new channels concerning connection modes. The setting made here is only applied as a default and can be overridden at the channel level, where necessary. Options are:

•View/Shared only: Prevents users from gaining exclusive access to a channel.

•Exclusive only: Ensures that all connections to a channel are made singularly.

•View/Shared & Exclusive: Permits either type of connection to be made.

Note: By default, all new channels are set to inherit this global value. So it’s easy to change all channel connection modes simply by changing the global setting. If a channel has its own setting, the global setting has no effect on that channel.

724-746-5500 blackbox.com

Page 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents ServSwitch iPATH Trademarks Used in this Manual ServSwitch iPATHFCC and IC RFI Statements ServSwitch iPATH Table of Contents Users Add User Group or Configure Group Specifications SpecificationsIntroduction Overview ServSwitch iPATH basics 2.1.1 ChannelsGroups User TypesSecurity IPATHServSwitch iPATH Interface Active DirectoryPermissions Indicators ServSwitch iPATH Unit FeaturesWhat‘s Included InstallationIPATH Unit Package ACR1000A-CTL Additional Items You May NeedAttaching the supplied rack mount brackets Installation Bracket AttachmentNetwork Connections ConnectionsPower Supply Connection Installation Requirements Front Panel IndicatorsConfiguration Login For Admin UsersSupported Browsers Adding ServSwitch Agility units Dashboard Home Dashboard TabLogin Required Dashboard SettingsGrant All Users Exclusive Access Allowed Connection ModesServSwitch iPATH IP Address Initial Streaming Mode2.5 DDC HotkeyGateway IP Address Time NTP Enabled?Netmask DNS Server IP AddressBackup Options Dashboard BackupsRestore from Server Restore from FileUpload New TX/RX Firmware Dashboard Updates Upgrade ServSwitch iPATH SoftwareDashboard Active Connections Dashboard Connection LogDashboard Event Log Channels Tab ConfigurationSearch Filters Channels View ChannelsChannel Name, Description and Location Channels Add or Configure a ChannelVideo, Audio, USB and Serial Allowed ConnectionsGroup Membership Channels Add or Configure Channel Group Channel Group and DescriptionChannel Group Membership Receivers View Receivers Receivers TabReceivers Configure Receiver Receivers Update Firmware Receivers Add Receiver Group or Configure GroupTransmitters View Transmitters Transmitters TabVideo Settings Transmitters Configure TransmitterSerial Settings Transmitters Update FirmwareUsers View Users Users TabPassword Users Add User or Configure UserAdmin? UsernameUsers Add User Group or Configure Group User Group NameIncluding and Excluding a User Within Groups or Channels Users Active Directory Initial ConfigurationChoosing Users and Groups Active Directory TipsPresets Tab Configuration Preset Name and Description Presets Add or Configure PresetsReceiver Channel Pairs Add another pairOperation OperationLogging Connection information displayed here Icon DescriptionsOperation About Black Box Black Box Tech Support FREE! Live /7

ACR1000A-CTL, ServSwitch iPATH specifications

The Black Box ServSwitch iPATH, ACR1000A-CTL, is a cutting-edge KVM (Keyboard, Video, Mouse) switch designed to deliver seamless control over multiple systems from a single workstation. This versatile device is ideal for IT professionals, data centers, and multimedia environments where efficient management of multiple servers and computers is essential. The iPATH series represents a significant advancement in KVM technology, ensuring both reliability and performance.

One of the hallmark features of the iPATH, ACR1000A-CTL, is its ability to switch between multiple computers effortlessly. With support for up to 16 different systems, users can easily navigate between servers using a simple button press or remote control, streamlining workflows and enhancing productivity. The switch supports high-resolution video formats, enabling crisp visuals and ensuring compatibility with modern display technologies, which is crucial for tasks that require detailed graphical representation.

In terms of connectivity, the Black Box ServSwitch iPATH boasts a robust array of options. It features standard USB ports for keyboard and mouse connectivity, as well as VGA and HDMI support for video output. This flexibility allows for easy integration into existing setups without the need for extensive modifications. Additionally, it incorporates advanced signal processing technologies to maintain high-quality video output even over long distances.

The iPATH ACR1000A-CTL also supports audio switching, enabling users to manage sound output from different systems alongside video and input devices. This consolidation of capabilities into a single switch not only reduces desk clutter but also simplifies the overall user experience.

Security is a priority for the iPATH series, as it includes features to protect sensitive data and ensure safe switching between systems. The device is designed to prevent cross-contamination of data by isolating signals between active connections, thereby securing information during operation.

Moreover, the Black Box ServSwitch iPATH is built with user-friendly operation in mind. It includes an intuitive interface and LED indicators that provide clear status updates, allowing users to monitor connections at a glance. With its reliable performance and feature-rich design, the ACR1000A-CTL stands out as a top choice for professionals seeking to efficiently manage multiple computing environments while ensuring the flexibility and security of their operations.
Top Page Image Contents