Black Box 1-Port T1/E1 Ethernet Network Extender Kit, LR0301A-KIT manual DIP Switches

Page 13

Chapter 4: DIP Switches

4. DIP Switches

4.1 Definition of DIP switches

Table 4-1 describes the DIP switches that are located on the extender’s front panel. You will use these switches for either full or Fractional T1/E1.

Table 4-1. Description of DIP switches for full or Fractional T1/E1.

DIP Switches	OFF	ON	Function

SW1-1	E1	T1	T1/E1 selection
SW1-2	See Table 3-2	See Table 3-2	Impedance

SW1-3	See Table 3-3	See Table 3-3	Frame Mode

SW1-4	See Table 3-3	See Table 3-3	Frame Mode

SW1-5	See Table 3-4	See Table 3-4	Line Code

SW1-6	See Table 3-5	See Table 3-5	LBO

SW1-7	See Table 3-5	See Table 3-5	LBO
SW1-8	See Table 3-5	See Table 3-5	DSX-1

SW2-1	See Table 3-5	See Table 3-5	DSX-1

SW2-2	Reserved	Reserved	Reserved
SW2-3	Reserved	Reserved	Reserved

SW2-4	Reserved	Reserved	Reserved

SW2-5	Nx64	Nx56(T1 only)	64K/56K Channel
SW2-6	Full	E1/T1 Fractional	E1/T1 Fractional

SW2-7	All zeros	All ones	Stuff bits

SW2-8	Internal	External	E1/T1 Clock Mode

Page 13

Image 13

Contents Port T1/E1 Ethernet Network Extender Kit Trademarks Used in this Manual Port T1/E1 Ethernet Network Extender KitFCC and IC RFI Statements Instrucciones DE Seguridad Normas Oficiales Mexicanas NOM Electrical Safety StatementEMC CE StatementPort T1/E1 Ethernet Network Extender Kit Specifications SpecificationsE1 AMI HDB3 Overview Introduction FeaturesWhat’s Included LED Descriptions OverviewFront and Back Panels OFF InstallationLBO OFF E1 CRC4 E1 CAS E1 CRC4+CAS InstallationOFF T1 SF T1 ESF OFF HDB3 AMI B8ZSPort T1/E1 Ethernet Network Extender Kit DIP Switches Definition of DIP switches DIP SwitchesPort T1/E1 Ethernet Network Extender Kit ON/OFF Factory Default DIP Switch ConfigurationOFF B8ZS OFF DS1About Black Box Black Box Tech Support FREE! Live /7