Extron electronic MAV setup guide Front Panel Operation, cont’d

Front Panel Operation, cont’d

Setting the Front Panel Locks (Executive Modes)

The matrix switcher has three levels of front panel security lock that limit the operation of the switcher from the front panel. The three levels are:

•Lock mode 0 — The front panel is completely unlocked.

•Lock mode 1 — All changes are locked from the front panel (except for setting Lock mode 2). Some functions can be viewed.

•Lock mode 2 — Basic functions are unlocked. Advanced features are locked and can be viewed only.

Basic features consist of:

m Making ties

m Saving and recalling presets

m Setting input audio gain and attenuation m Changing Lock modes

Advanced features consist of:

m Setting video and audio output mutes m Setting audio output volume

NThe switcher is shipped from the factory in Lock mode 2.

NFor a complete list of advanced features, refer to the CrossPoint 450 Plus / MAV Plus User’s Manual, available on the Extron DVD or at www.extron.com.

Selecting Lock mode 2 or toggling between mode 2 and mode 0

NIf the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2.

If the switcher is in Lock mode 2, this procedure selects mode 0 (unlocks the switcher).

Toggle the lock on and off by pressing and holding the Enter button, the Video button, and the Audio button for approximately 2 seconds.

Press and hold simultaneously.

I / O

ENTER VIDEO AUDIO

	2 seconds
	I / O
ENTER	VIDEO AUDIO	The buttons blink twice.
		Release the buttons.

3-4 CrossPoint / MAV Matrix Switchers • Front Panel Operation

Selecting Lock mode 2 or toggling between mode 2 and mode 1

NIf the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2.

If the switcher is in Lock mode 2, this procedure selects mode 1.

Toggle the lock on and off by pressing and holding the Video button and the Audio button for approximately 2 seconds.

Press and hold simultaneously.

I / O

VIDEO AUDIO

2 seconds

I / O

VIDEO AUDIO

The buttons blink twice.

Release the buttons.

Viewing and Adjusting the Input Audio Level and Output Volume

1.	Press and hold the Audio button until it flashes.
			2 seconds
		AUDIO			AUDIO
	Press and			Audio button blinks.
	Hold
2.	Press an input button (for input level) or output button
	(for volume). Refer to the CrossPoint 450 Plus / MAV Plus
	Switcher User's Manual, chapter 3, “Operation”, to read the
	displayed value.
3.	Increase/decrease the level or volume by pressing the Esc
	(>) and View (<) buttons.
4.	Press and release the Audio button to exit.

CrossPoint / MAV Matrix Switchers • Front Panel Operation 3-5

Refer also to the CrossPoint 450 Plus / MAV Plus User’s Manual at www.extron.com. Refer also to the CrossPoint 450 Plus / MAV Plus User’s Manual at www.extron.com.