Black Box ACS2228A-R2-xx ACS4001A-R2-xx, ACS2009A-R2-xx, ACS4222A-R2-xx manual Quick Setup

Page 8

DVI-D FIBER KVM-EXTENDER

1. Quick Setup

This section briefly describes how to install your KVM extender system. Unless you are an experienced user, we recommend that you follow the full procedures described in the rest of this manual.

Install system

1.Connect Remote unit to KVM.

2.Connect Local unit to CPU or switch.

3.Connect Local and Remote units with matching interconnection cable (Fiber).

4.Power up the system.

NO

Power LED illuminated?

YES

Check p.s.u.’s and connection to power outlet

NO

Link LED illuminated ?

YES

Check the Fiber cable, and Fiber connectors

	Video OK	NO
	LED ?
	illuminated ?
	illuminated ?	Check settings of graphic card
		Check settings of graphic card
	YES	or boot CPU

Done

8

Image 8

Contents

DVI-D-Fiber-KVM-Extender Single and DualHead Manual Welcome to the DVI-D Fiber KVM-Extender Family Copyrights and Trademarks DVI-D Fiber KVM-EXTENDER Declaration of Conformity Safety Precautions and Installation Guidelines Contents Quick Setup Introduction GlossaryDVI-D Fiber KVM Extender system example Features DVI-D Fiber Extender Upgrade KitsProduct Range Compatibility Interface CompatibilityHow to Use This Guide Installation Package ContentsACS2028A-R2-xx, ACS4022A-R2-xx additionally Power Supply Interconnection Cable RequirementsSystem Setup DVI-D Fiber KVM-Extender Type ACS2009A-R2-xx Local Unit DVI-D Fiber KVM-Extender Type ACS2009A-R2-xx Remote UnitDVI-D Fiber KVM-Extender Type ACS2209A-R2-xx Local Unit DVI-D Fiber KVM-Extender Type ACS2209A-R2-xx Remote UnitDVI-D Fiber KVM-Extender Type ACS2028A-R2-xx Local Unit DVI-D Fiber KVM-Extender Type ACS2028A-R2-xx Remote UnitDVI-D Fiber KVM-Extender Type ACS2228A-R2-xx Local Unit DVI-D Fiber KVM-Extender Type ACS2228A-R2-xx Remote UnitConnect to 5V Power Supply DVI-D Fiber KVM-Extender Type ACS4001A-R2-xx Local Unit DVI-D Fiber KVM-Extender Type ACS4001A-R2-xx Remote UnitDVI-D Fiber KVM-Extender Type ACS4201A-R2-xx Local Unit DVI-D Fiber KVM-Extender Type ACS4201A-R2-xx Remote UnitDVI-D Fiber KVM-Extender Type ACS4022A-R2-xx Local Unit DVI-D Fiber KVM-Extender Type ACS4022A-R2-xx Remote UnitDVI-D Fiber KVM-Extender Type ACS4222A-R2-xx Local Unit DVI-D Fiber KVM-Extender Type ACS4222A-R2-xx Remote UnitDVI-D Fiber KVM-EXTENDER Diagnostic LEDs Diagnostic LEDs at DVI-D Fiber ExtenderAppearance Diagnostics LEDService Setup Setup at the Local Unit DDCSelection of Color depth Setup at the Remote Unit Switching during HsyncDefault Switching during VsyncMonitor PS2-KeyboardThere isn’t a picture ‘Stepping’ pictures on displaying moviesPS2-Mouse USB-Keyboard/USB-MouseYour USB-keyboard/USB-mouse does not work Your mouse is ‘stepping’ on your screenYour USB-HID device does not work USB-HID deviceYour mouse is moving like ‘hanging on a rubber band’ Other USB-devices Your USB- device does not workAppendix a Example Applications DVI-D Fiber KVM-Extender with optional, secondary screenDVI-D Fiber KVM-EXTENDER Mounting Instruction Rackmount-Kit ACS1009A-RMK Mounting instructionDVI-D Fiber KVM-EXTENDER Mounting Instruction Rackmount-Kit ACS2228A-RMK DVI-D Fiber KVM-EXTENDER Single head KVM devices Dual head KVM devices and Media devices no USBAudio Interface Set Up and Operation Appendix D Calling Technical Support Shipping and PackagingBlack Box Technical Support Power required Signal LevelsLocal Unit Connectors Remote Unit ConnectorsOperating Temperature Storage TemperatureSerial Speed Serial Data FormatAppendix F Connectors Pin SignalPS2-KBD CLK PS2-MOUSE CLK PS2-MOUSE VCC-IN +5V Pin Pin Keyboard MouseKeyboard/Mouse Connector, USB Typ B Keyboard/Mouse Connector, USB Typ aPin Connector device Keyboard Pin MouseRS232 Singlehead Devices only CATx- Interface Pin out according to EIA/TIA 568A 1000BaseT