Black Box ACU5116A, ACU5114A manual Other products in the Wizard range, Safety information

Page 24

Other products in the Wizard range

The following related Wizard items are available:

• Wizard Extender ACU5013A

Allows one system to be controlled from two locations or permits a second video channel to be sent to a remote location. Used in conjunction with two receiver/remote modules ACU5111A.

• Rack mount chassis ACU5000A

This 19” chassis allows multiple Wizard modules to be neatly arranged within a standard cabinet. Securing plates and screws are supplied separately for each Wizard module for use with the rack mount chassis.

• Power distribution module PS5000

Provides power for up to four Wizard modules to reduce mains power socket requirements.

•Rack mount securing plates

•single slot blanking plate ACU5003

•quad slot blanking plate ACU5004

Safety information

•For use in dry, oil free indoor environments only.

•Do not use to link between buildings.

•Ensure that the twisted pair interconnect cable is installed in compliance with all applicable wiring regulations.

•Do not connect the CATx link interface (RJ45 style connector) to any other equipment, particularly network or telecommunications equipment.

•Warning – the power adapter contains live parts.

•No user serviceable parts are contained within the power adapter - do not dismantle.

•Plug the power adapter into a socket outlet close to the Wizard unit that it is powering.

•Replace the power adapter with a manufacturer approved type only.

•Do not use the power adapter if the power adapter case becomes damaged, cracked or broken or if you suspect that it is not operating properly.

•If you use a power extension cord with the extenders, make sure the total ampere rating of the devices plugged into the extension cord do not exceed the cord’s ampere rating. Also, make sure that the total ampere rating of all the devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

•Do not attempt to service the Wizard modules yourself.

•The Wizard modules and power supplies can get warm in operation – do not situate them in an enclosed space without any ventilation.

•The Wizard modules do not provide ground isolation and should not be used for any applications that require ground isolation or galvanic isolation.

®

        

23

Page 23 Page 25
Image 24
Page 23 Page 25
Contents ServSwitch Wizard Extenders Contents Introduction WizardExtender Supplied items ACU5114A variant Serial cable for RS232 connectionSupplied items ACU5116A variant Local ACU5116A moduleInstallation Stage a Configuration switch settingsLocal module switches Local SwitchRemote module switches Remote SwitchRemote Switches 2 Installation Advice Stage B Mounting a module desk or rackDesk mount Rack mountStage C Connections Connections at the Local moduleOptional power connection Local keyboard, video and mouse connectionsLocal speaker connection Twisted pair, power and serial connections Power supply connectionConnections at the Remote module Keyboard, video and mouse connectionsAudio connections ACU5116A only To the socket labelledPower and activity indicators User arbitration and keyboard indicatorsOperation General useTo enable the video To disable the videoLocking and unlocking the system To lock the systemConfiguration Entering, using and exiting configuration modeTo enter and use configuration mode To exit from configuration modePassword setting Password overrideTo set a password To override the Remote passwordMicrosoft and Logitech -specific mouse settings Which restore setting do I use?Hot plugging and mouse restoration Image controls sharpness and brightness To display a suitable high contrast imageTo use the image controls If the image controls cannot provide a crisp imageSkew adjustment To use skew adjustmentMiscellaneous settings Reset all configuration options to default statesReport firmware version Flash upgrade Stage a Download the upgrade filesStage B Create a startup diskette Copy the downloaded files to the diskStage D Reconfigure the Remote connections and begin Stage E Return all connections to their usual statesTroubleshooting Getting assistanceNo video image is received at the Remote module On-screen mouse pointer does not respond to mouse movementsSafety information Other products in the Wizard rangeRadio Frequency Energy European EMC directive 89/336/EECFCC Compliance Statement United States Certification notice for equipment used in Canada Normas Oficiales Mexicanas NOM electrical safety statement Instrucciones de seguridadBlackBox subsidiary contact details Country Web Site/Email Phone FaxPage Copyright 2006. Black Box Corporation. All rights reserved
Top Page Image Contents