Black Box ACU5114A manual Audio connections ACU5116A only, To the socket labelled

Page 12

Audio connections (ACU5116A only)

On the ACU5116A REMOTE module, audio connections are available at the two 3.5” jack sockets mounted on the side (same side as the switch bank). Note:

The microphone input (labelled ) has a dual function whereby it can either support a mono-channel microphone or alternatively receive stereo line input. Switch 3 on the LOCAL module controls the setting of this port: LOCAL switch 3 OFF - microphone, LOCAL switch 3 ON - stereo line in.

Note: When the REMOTE module is rack mounted, the audio connections must be made after the module has been fixed in place. Access is required to

®

1Connect the microphone (or stereo line input) plug to the REMOTE module

socket labelled .

Note: Ensure that the setting of switch 3 on the LOCAL module matches the input to this socket: OFF-microphone; ON-stereo line input).

2 Connect the speaker plug

to the socket labelled	.
	Speaker
	connection

Microphone (or stereo line-in) connection

the rear and above the rack. Remember to remove the audio connections before attempting to slide out the REMOTE module.

        

11

Image 12

Contents ServSwitch Wizard Extenders Contents Introduction WizardExtender Supplied items ACU5114A variant Serial cable for RS232 connectionSupplied items ACU5116A variant Local ACU5116A moduleInstallation Stage a Configuration switch settingsLocal module switches Local SwitchRemote module switches Remote SwitchRemote Switches 2 Installation Advice Stage B Mounting a module desk or rackDesk mount Rack mountStage C Connections Connections at the Local moduleOptional power connection Local keyboard, video and mouse connectionsLocal speaker connection Twisted pair, power and serial connections Power supply connectionConnections at the Remote module Keyboard, video and mouse connectionsAudio connections ACU5116A only To the socket labelledPower and activity indicators User arbitration and keyboard indicatorsOperation General useTo enable the video To disable the videoLocking and unlocking the system To lock the systemConfiguration Entering, using and exiting configuration modeTo enter and use configuration mode To exit from configuration modePassword setting Password overrideTo set a password To override the Remote passwordMicrosoft and Logitech -specific mouse settings Which restore setting do I use?Hot plugging and mouse restoration Image controls sharpness and brightness To display a suitable high contrast imageTo use the image controls If the image controls cannot provide a crisp imageSkew adjustment To use skew adjustmentMiscellaneous settings Reset all configuration options to default statesReport firmware version Flash upgrade Stage a Download the upgrade filesStage B Create a startup diskette Copy the downloaded files to the diskStage D Reconfigure the Remote connections and begin Stage E Return all connections to their usual statesTroubleshooting Getting assistanceNo video image is received at the Remote module On-screen mouse pointer does not respond to mouse movementsSafety information Other products in the Wizard rangeRadio Frequency Energy European EMC directive 89/336/EECFCC Compliance Statement United States Certification notice for equipment used in Canada Normas Oficiales Mexicanas NOM electrical safety statement Instrucciones de seguridadBlackBox subsidiary contact details Country Web Site/Email Phone FaxPage Copyright 2006. Black Box Corporation. All rights reserved