Cisco Systems OL-12812-01 manual VIC-2DID

Page 10

Connecting Cisco Voice Network Modules to the Network

IP Communications High-Density Digital Voice or Fax Network Module

Table 1

PVDM2 Module SKUs

 

 

 

Module Name

 

Description

 

 

 

PVDM2-32

 

32-channel packet fax or voice DSP module

 

 

 

PVDM2-48

 

48-channel packet fax or voice DSP module

 

 

 

PVDM2-64

 

64-channel packet fax or voice DSP module

 

 

 

You can install up to four PVDM2 modules on all of the NM-HDV2 SKUs. The number of channels supported depends on the number and density-type of PVDM2 modules installed.

Table 2

Channels Per PVDM2 Module Type

 

 

 

 

 

 

 

 

 

Max Channels for High

Max Channels for

Range of Channels for

Module Name

 

Complexity1

Medium Complexity2

Flexi Complexity3

PVDM2-8

 

4

4

4-8

 

 

 

 

 

PVDM2-16

 

6

8

6-16

 

 

 

 

 

PVDM2-32

 

12

16

12-32

 

 

 

 

 

PVDM2-48

 

18

24

18-48

 

 

 

 

 

PVDM2-64

 

24

32

24-64

 

 

 

 

 

1.High-complexity vocoders supported: G.711, G.726, G.729, G.723.1, G.728, and Fax Relay.

2.Medium-complexity vocoders supported: G.711, G.726, G.729a, and Fax Relay.

3.Flexi vocoders supported: G.711, G.726, G.729, G.723.1, G.728, and Fax Relay (number of channels depends on codec selected).

Note PVDM and PVDM2 modules are not interchangeable. Use PVDM modules with the NM-HDV network module only, and use PVDM2 modules with the NM-HDV2 network module only.

When used with PVDM2 modules and either the built-in T1/E1 ports or the T1/E1 voice or WAN interface cards (VWIC), the NM-HDV2 network module provides the interface to the PBX, the PSTN, or WAN. The following VWICs are supported:

VWIC-1MFT-T1

VWIC-2MFT-T1

VWIC-2MFT-T1-DI

VWIC-1MFT-E1

VWIC-2MFT-E1

VWIC-2MFT-E1-DI

VWIC-1MFT-G703

VWIC-2MFT-G703

When used with PVDM2 modules and next-generation analog or BRI voice interface cards (VIC2), the NM-HDV2 network module provides the interface to telephony equipment (PBX, key systems, telephones, and fax machines) and to the PSTN. The following VICs are supported:

VIC-2DID

VIC-1J1

Connecting Cisco Voice Network Modules to the Network

10

Image 10
Contents Connecting Cisco Voice Network Modules to the Network Voice Network Modules4-Channel Voice Network Modules 48-Channel High-Density Voice Network ModulesChannel High-Density Voice Network Module Packet Voice DSP Modules Pvdm Orientation Pvdm OrientationInstalling PVDMs Removing PVDMsVoice Network Module LEDs View from front of boardHDV Network Module LEDs Voice Network Module LEDPacket Fax or Voice DSP Modules NM-HDV2VIC-2DID Configuring E1 Ports for Normal or Wetting Current Mode Installing PVDM2 Modules NM-HDV2-2T1/E1 Jumpers Configured for Normal ModePVDM2 Module Orientation PVDM2 Module Slot LocationsInstalling PVDM2 Modules Removing PVDM2 ModulesInstalling PVDM2 Modules NM-HDV2 Network Module LEDsRelated Documents NM-HDV2 Network Module LEDsConnecting Cisco Voice Network Modules to the Network