Cisco Systems OL-12812-01 manual Installing PVDM2 Modules

Page 12

Connecting Cisco Voice Network Modules to the Network

IP Communications High-Density Digital Voice or Fax Network Module

Figure 16 NM-HDV2-2T1/E1 Jumpers Configured for Normal Mode

J6

J7

135658

Pin 3 Pin 2

Pin 1

Installing PVDM2 Modules

The NM-HDV2 network modules contain four 80-pin SIMM sockets for PVDM2 modules, numbered 0 through 3. (See Figure 17.) Each socket can be filled with a single 80-pin PVDM2 module.

Connecting Cisco Voice Network Modules to the Network

12

Image 12

Contents Connecting Cisco Voice Network Modules to the Network Voice Network Modules4-Channel Voice Network Modules 48-Channel High-Density Voice Network ModulesChannel High-Density Voice Network Module Packet Voice DSP Modules Pvdm Orientation Pvdm OrientationInstalling PVDMs Removing PVDMsVoice Network Module LEDs View from front of boardHDV Network Module LEDs Voice Network Module LEDPacket Fax or Voice DSP Modules NM-HDV2VIC-2DID Configuring E1 Ports for Normal or Wetting Current Mode Installing PVDM2 Modules NM-HDV2-2T1/E1 Jumpers Configured for Normal ModePVDM2 Module Orientation PVDM2 Module Slot LocationsInstalling PVDM2 Modules Removing PVDM2 ModulesInstalling PVDM2 Modules NM-HDV2 Network Module LEDsRelated Documents NM-HDV2 Network Module LEDsConnecting Cisco Voice Network Modules to the Network