Cisco Systems 511 Protecting Against Electrostatic Discharge, Rack Installation Safety Guidelines

Page 56

Chapter 2 Preparing to Install the Content Engine

Safety Guidelines

To help protect your system components from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

Position cables and power cords carefully; route cables and the power cord and plug so that they cannot be stepped on or tripped over. Be sure that nothing rests on your system components’ cables or power cord.

Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always follow your local or national wiring rules.

Protecting Against Electrostatic Discharge

Static electricity can harm delicate components inside the Content Engine. To prevent static damage, discharge static electricity from your body before you touch any of your system’s electronic components. You can do so by touching an unpainted metal surface on the chassis.

You can also take the following steps to prevent damage from electrostatic discharge (ESD):

When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging, be sure to discharge static electricity from your body.

When transporting a sensitive component, first place it in an antistatic container or packaging.

Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads and workbench pads.

Rack Installation Safety Guidelines

Before installing your Content Engine in a rack, review the following guidelines:

Two or more people are required to install the device in a rack.

Ensure that the room air temperature is below 95°F (35°C).

Do not block any air vents; usually 6 inches (15 cm) of space provides proper airflow.

 

Cisco Content Engine 511 and 566 Hardware Installation Guide

2-6

OL-5756-01

Image 56
Contents Cisco Content Engine 511 and 566 Hardware Installation Guide Page Cisco Content Engine 511 and 566 Hardware Installation Guide Page N T E N T S Specifications Preparing and Installing a Fibre Channel Adapter ViiViii Preface Document ObjectivesChapter Title Description AudienceDocument Organization Document Conventions Convention DescriptionXii Xiii Waarschuwing Belangrijke VeiligheidsinstructiesVaroitus Tärkeitä Turvallisuusohjeita Xiv Warnung Wichtige SicherheitshinweiseAvvertenza Importanti Istruzioni Sulla Sicurezza TA Vare PÅ Disse Instruksjonene Aviso Instruções Importantes DE SegurançaVarning! Viktiga Säkerhetsanvisningar XviXvii GEM Disse Anvisninger XviiiXix OL-5756-01 Obtaining Documentation Cisco.comOrdering Documentation XxiDocumentation Feedback Obtaining Technical AssistanceCisco Technical Support Website XxiiSubmitting a Service Request XxiiiDefinitions of Service Request Severity XxivXxv Xxvi Introducing the Content Engine IntroductionModel Product Number CE-511 and CE-566-Front ViewCE-566 Back Panel with Scsi Port Connector Functional Description Content EngineSpecification Description Content Delivery Network Component Content Caching DeviceHardware Features Front Panel Control Buttons CE-511 and CE-566 Front PanelLED Indicators Color State DescriptionIndicator Color State Description 10BASE-T/100BASE-TXState Meaning Fibre Channel Adapter LEDsInput/Output Ports and Connectors 7describes the back panel ports and receptacles Ethernet Port Scsi Port Video Port Destination Pin Number DestinationSpecifications PCM 6 or compressed audio coding 3 AC-3 Specification Description Regulatory Compliance EMC Class a Warning Statements Class a Warning for Hungary OL-5756-01 Preparing to Install the Content Engine Safety WarningsOL-5756-01 Preparing to Install the Content Engine Safety Warnings Safety Guidelines General PrecautionsPreparing to Install the Content Engine Safety Guidelines Rack Installation Safety Guidelines Protecting Against Electrostatic DischargePreparing to Install the Content Engine Safety Guidelines OL-5756-01 Installing the Content Engine Tools and Parts RequiredInstalling a CE-511 or CE-566 Unit Installing the Chassis in a 2-Post Rack Orientation for 19-inch rackInstalling the Chassis in a 4-Post Rack Installing the Chassis in the RackRack Installation Kit Installing Clip Nuts or Cage Nuts Removing the Inner Slide Rail Attaching the Inner Slide Rail to the Content Engine Attaching the Slide Rails to the Rack Inserting the Inner Slide Rails Installing the Chassis on a Tabletop Connecting Cables Connecting Power and Booting the System Review the information in the Safety Warnings section onRemoving or Replacing a Content Engine Checking the LEDsOL-5756-01 OL-5756-01 Installing Hardware Options Removing the Cover and BezelRemoving the Content Engine Cover Installing Adapters Removing the Content Engine BezelInstalling Hardware Options Installing Adapters Installing an Mpeg Decoder Adapter Removing the Expansion Slot Cover Installing an Adapter in PCI-X Slot Preparing and Installing a Fibre Channel Adapter Preparing to Install the Adapter Installing the Fibre Channel Adapter Hardware Problems Installing a Hard Disk Drive in the CE-511 Working with Hard Disk DrivesInstalling a Sata Hard Disk on CE-511 Installing a Hard Disk Drive in the CE-566 Scsi hard disk drive Screws Hard disk drive tray Completing the Installation Assigning Scsi IDsInstalling the Content Engine Cover and Bezel Installing the Content Engine Cover Troubleshooting the System Hardware Checking the BasicsChecking Connections and Switches OL-5756-01 OL-5756-01 Maintaining the Content Engine Maintaining Your Site EnvironmentTemperature Dust and Particles HumidityAltitude Corrosion Electrostatic DischargeElectromagnetic and Radio Frequency Interference MagnetismPower Source Interruptions Using Power Protection Devices Uninterruptible Power SuppliesSurge Protectors Line ConditionersCisco Content Engine 511 and 566 Hardware Installation Guide D E IN-1ESD IN-2IN-3 IN-4 RFI IN-5Wccp IN-6

566, 511 specifications

Cisco Systems 511,566 is a cutting-edge networking solution designed to enhance the capabilities of businesses in today's digital landscape. As part of Cisco's extensive portfolio, this device integrates advanced features and technologies aimed at improving performance, security, and reliability in network operations.

One of the main features of the Cisco Systems 511,566 is its support for high-speed data transfer. With a robust processing capability, it can handle large volumes of data traffic, making it ideal for enterprises that require rapid and reliable connectivity. The device leverages advanced routing protocols to optimize data paths, ensuring efficient bandwidth utilization.

In terms of security, the Cisco Systems 511,566 incorporates state-of-the-art security measures that protect critical business information. It features built-in firewalls, intrusion detection systems, and secure VPN capabilities. This multi-layered security architecture helps safeguard against external threats while ensuring that data remains confidential and secure.

The device is also equipped with scalable architecture, allowing businesses to expand their network capabilities as they grow. It supports multiple interfaces and connectivity options, enabling seamless integration with existing infrastructure. This scalability makes it a flexible choice for organizations that anticipate changes in their networking needs.

Cisco's commitment to innovation is evident in the intelligent technologies integrated into the 511,566. It utilizes machine learning algorithms to monitor network performance in real time, allowing for proactive troubleshooting and optimization. With these insights, IT teams can quickly identify issues and mitigate them before they impact business operations.

Another characteristic of the Cisco Systems 511,566 is its user-friendly interface. The device is designed with intuitive management tools that simplify configuration and monitoring tasks. This ease of use enables IT professionals to manage the network efficiently without extensive training.

Furthermore, the 511,566 is capable of supporting IoT (Internet of Things) devices. With the increasing number of connected devices in the workplace, having reliable support for IoT is crucial. This capability ensures that businesses can leverage smart technologies to enhance productivity and operational efficiency.

In conclusion, Cisco Systems 511,566 stands out as a powerful networking solution that combines speed, security, scalability, and intelligence. Its advanced features make it an excellent choice for organizations looking to enhance their network capabilities and support future growth in the ever-evolving digital age.