Lathem PC2500, PC3500, PC2000, PC400, PC100-R manual SWIFT-485 plus

PC100 Terminal User’s Guide

	Use either	RJ11 RJ45		Use either
	connection			connection
RS485	-	PC100
	+	PC2000	PC2500
Power
	~	RS485	RS485
to terminals	~			~	Power to
LED’s				~	terminals
		POWER		+	RS485
	RS232			-
RS232		SWIFT-485 plus
to PC

Connecting Terminals via RS-485 (Star Configuration)

A star network connects up to 31 terminals or sync time devices to the computer. You can wire the terminals directly to the SWIFT-485+ or use J- kits (junction boxes). Terminals can be located up to 4000 feet from the computer

SWI

SWIFT-485+

1.Run Category 3 (minimum) cable from the SWIFT-485+ to a terminal or J-kit. If you connect directly to a terminal, use an RJ-45 or RJ-11 connector on the end that plugs into the terminal

2.Connect the AC power cord adapter to each terminal and plug the cord into a wall outlet

3.Repeat these steps for each terminal in the network

5