PC100 Terminal User’s Guide
C H A P T E R 2
Mounting the PC100
Check your package contents to make sure everything is accounted for before starting. Decide where to mount your clock. Keep in mind that the AC adapter plugs into a wall outlet.
To mount the clock, you need the following items:
Drill with a 5/16” bit
Hammer
Phillips head screwdriver
Pencil
1.Screw the mounting bracket to the wall
»Hold the bracket against the wall so the top (arrow pointing Up) is 54 inches from the floor
»Mark the 3 holes with a pencil
»Remove the bracket and drill a
»Insert an anchor into each hole, tapping it with a hammer until it is flush against the wall
»Align the mounting bracket back on the wall
»Insert each screw through the bracket into the anchors, and tighten securely
2