PC100 Terminal User’s Guide
C H A P T E R 4
Using the PC100
The base model PC100 clock allows only an
The PC100 has a magnetic stripe badge reader. The magnetic stripe should be on the left side of the badge when swiping. To swipe the badge, insert it at the top of the reader, and then pull it down with a continuous and smooth motion.
Special Badges
Three supervisor badges are available for your PC100. These badges perform certain tasks at the clock.
Badge #251 – View Clock Status
This badge displays a clock status report. The status report shows the current clock setup:
VER 1.05 | CLK | READY | |
ID# | 049 BAUD | 9600 | |
MEM | 10% | TIME 12HR | |
7 |
| DST | ON |
|
|
| |