Lathem 5000E manual Wall Mounting, Replacing Ribbon Cassette

Page 20

WALL MOUNTING

Step1

Four screws

•Leave screw heads about 1/8" from wall.

Step3

• Put on the top case.

Step2

• Remove the top case and hang on the wall.

• Select wall area near AC outlet.

•Mount the Time Recorder on wood or a surface which can support weight (dry wall will not support unit).

REPLACING RIBBON CASSETTE

1. Carefully slide the exposed ribbon under the print head.

2. Push cassette with the projection into the ribbon cassette holder until snapped into place.

3. Turn the ribbon feed knob clockwise until the ribbon is taut.

Ribbon cassette holder

Projection

18

Image 20

Contents Lathem Time Corporation Lathem Time Corporation Features Before Using Your Time Clock Attached AccessoriesPrint Position on Time Card ConfigurationLocation of Name Quick Easy Setup StepHOW to Program the Clock DIPSW1 DIPSW2Setting the Time ExampleSetting the Date Setting the Starting Daylight Saving Time Setting the Ending Daylight Saving Time Number Repeat Times SET Setting the NumberInitial Number SET Number Reset Preprogramed Comments Setting Press the SW2 key until the correct number appearsSetting the Password Registering the PasswordHOW to Change Settings When Password is SET Canceling the Password Print Method Setting Print Switch Type of AN HourLeft or Right Print LeadingNumber of Year Digits Type of LanguageWall Mounting Replacing Ribbon CassetteDIP Switch Setting DIPSW1 DIPSW2Print example Specifications Main Function