Digital Display Wall Clock Guide | Page 14 |
|
|
»Slide the front panel display back into the case, replace the end cap and secure with the two phillips head screws.
Vent holes
For single gang box mount
For 1/2" conduit
Keyholes for
wall mount
Figure 3
Double Mount - Wall
DDC2 Requires optional mounting kit (SAM0630)
DDC4 Requires optional mounting kit (SAM0625)
Tools required for mounting the clock:
Flat blade screwdriver Phillips head screwdriver 15/16" open end wrench
The double wall mount plate attaches to a double or single gang box installed securely in the wall. Required wiring should be available through the gang box at time of installation.
»Remove the two chase nipples from the mounting plate posts.
»Run the required wiring from the gang box through one of the mounting posts of the mounting plate.
»Secure the mounting plate securely to the gang box with the proper screws. (not supplied)