Lathem 4000 manual Replacing the Type Section

Page 12

2000 – 4000 Series Time Recorder User’s Guide

Replacing the Type Section

If your type section needs servicing, you can easily remove and replace it without sending the entire machine for service.

Figure 8

1.Remove the top cover.

2.Remove Type Section Retaining Ring and Washer– Figure 8, 8.1.

3.If the type section has digital time display, unplug connectors (not shown).

4.Lift type section slightly and move it to the right to release Hinge Pins – Figure 8, 8.2 from their sockets. The Type Section will lift out.

Page 10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 2000 4000 Series Contents Ordering Accessories Setting the Time Determine Your ModelRaise the Type Section Set the Time on the Type WheelsPage Dial of Decimal Equivalents Setting Decimal Wheel with Tenths Set the Time on the Analog Clock Face Make a sample registration on paperSet the Time on the Digital Clock Face Changing the Ribbon Replacing the Type Section Install / Replace Batteries in Batt Changing the Motor Shows a close-up of cam block terminalWarranty OMOV0605A Revised
Top Page Image Contents