Casio DT-X5 manual Battery Charge Block, Weight/Dimensions

Battery Charge Block

Table 2.17

			Item		Specification	Remark
Charge control
	Output voltage				DC4.22V±30mV
	Charge current (standard mode)				DC1,600mA±10%
	Charge current (standby mode)				DC160±40mA
	Full charge detection current				DC120±30mA
	Voltage control		Full charge detection voltage		4.1V
			Re-charge detection voltage		4.0V
	Re-charge detection		voltage		DC4.0±0.1V
	Input voltage				DC8.0 to 20V
	Timer
		Charge timer (standby mode)			90 minutes
		Charge timer (standard mode)			720 minutes
		Trickle charge timer			120 minutes
	Charge hour
		HA-A20BAT		Approx. 2.5 hours (for 1 pack)		At 0 to 40 ºC
				Approx. 5.0 hours (for 2 packs at same time)
		DT-5025LBAT		Approx. 5.0 hours (for 1 pack)		At 0 to 40 ºC
				Approx. 10.0 hours (for 2 packs at same time)
	Temperature control			Not available
	No. of charge outputs			1
Operation mode
	Battery pack mount detection
		Battery pack not mounted		LED OFF, charge output OFF
		Battery pack mounted		LED ON in red, charge output OFF
	Check	on battery pack		LED ON in red, charge output OFF
	Battery charge (standby mode)			LED ON in red, charge output ON
	Battery charge (standard mode)			LED ON in red, charge output ON
	Wait mode in trickle charge			LED ON in green, charge output OFF
	Charge in trickle mode			LED ON in green, charge output ON
	Charge completed			LED ON in green, charge output OFF
	Charge abnormal end			LED flash in red, charge output OFF
Other
	Priority order of battery charging			Order in mounted order

Weight/Dimensions

Table 2.18

Item	Specification	Remark
Weight	Approx. 154 g
Dimensions	100 (L) x 110 (W) x 49 (H) mm

33