Inserting an Image into a Label
You can use either of following two methods to input an image into a label.
•Inputting an image from a file
•Capturing a PC screen image
Important!
•To input an image into a label, you need to select print pattern 6 or
pattern 7 (page 47), or a setting that is marked with 
on the Advanced Print Pattern Settings dialog box (page 48).
•Even if you are inserting a color image, it is printed in monochrome in accordance with the “Dithering” settings. See page 55 for more information.
•To view the actual print image, click 
.
To input an image from a file
1.On the main window, click the 
button. This displays the Image dialog box.
2.Click Open Image.
3.Select the file name of the BMP or JPEG image you want to input, and then click Open.
This displays the selected image in color in the center of the Image Settings dialog box preview area.
4.After making sure the preview shows the image you want, click OK. Note that the layout preview image on the main window shows the image you selected in monochrome.
Note
•See page 55 for information about monochrome conversion dithering settings.
Capturing a PC Screen Image
Perform the following steps to capture a screen image and insert it into a label.
1.On the main window, click the 
button. This minimizes the main window.
52