Chapter 4 | Hardware Installation and Upgrade | 28 |
4.1 | Jumpers and Connectors | 28 |
4.2 | Disassembling the Panel PC | 29 |
| Figure 4.1:Unscrew the screw of side cover | 29 |
| Figure 4.2:Unscrewing rear cover of the panel PC | 29 |
| Figure 4.3:Opening the rear cover | 30 |
| Figure 4.4:The PPC without the Rear Cover | 30 |
4.3 | Installing the 2.5" Hard Disk Drive (HDD) | 31 |
| Figure 4.5:Screw the HDD metal frame to the side of the | |
| HDD31 |
|
| Figure 4.6:Place the HDD frame so it fits with the studs. | |
| 31 |
|
| Figure 4.7:Plug the EIDE cable into the HDD | 32 |
| Figure 4.8:Screw the right side of the metal plate to fix it | |
| 32 |
|
| Figure 4.9:Screw the left side of the metal plate to fix it.. | |
| 32 |
|
4.4 | Installing the Central Processing Unit (CPU) | 33 |
4.5 | Installing the DDR SDRAM Memory Module | 35 |
| Figure 4.10:Placing the memory module in the DIMM35 |
Chapter | 5 | Jumper Settings & |
| |
Connectors | 38 |
|
| |
| 5.1 | Jumpers and Connectors | 38 | |
|
| 5.1.1 | Setting jumpers | 38 |
|
| 5.1.2 | Jumpers and switches | 39 |
|
|
| Table 5.1:Jumpers, switches and their functions | 39 |
|
| 5.1.3 | Jumper Locations | 39 |
|
|
| Figure 5.1:Jumpers on the | 39 |
|
| 5.1.4 | Connectors | 40 |
|
|
| Table 5.2:Panel PC connectors | 40 |
|
| 5.1.5 | Locating connectors | 41 |
|
|
| Figure 5.2:Connectors on | 41 |
| 5.2 | CPU Installation | 42 | |
| 5.3 | CMOS Clear for External RTC (JP3) | 42 | |
|
|
| Table 5.4:CMOS clear (JP3) | 42 |
| 5.4 |
| 43 | |
|
| 5.4.1 COM2 | 43 | |
|
|
| Table 5.5:COM2 | 43 |
|
|
| Table 5.6:COM 1/2 Pin 9 setting (JP5) | 44 |
| 5.5 | VGA interface | 44 | |
|
| 5.5.1 LCD panel power setting | 44 | |
|
|
| Table 5.7:LCD Panel Power Setting (JP2) | 44 |
Chapter | 6 | Driver Installation | 46 |
x |