Ricoh PPC-154 user manual Specifications, Power supply AC model 180 watts

1.2 Specifications

General

•Dimensions (W x H x D): 420 x 323 x 130.5 mm (16.54" x 12.72" x 5.12")

•Weight: 7 kg(15.4 lbs)

•Power supply:

AC model: 180 watts

Input voltage: 100~240 VAC , 4 A max. @ 50 ~ 60 Hz

Output voltage: +3.3V@16.8A, +5V@12A, +12V@10A -12V@0.8A, +5VSB@2A

•Disk drive housing: Space for one 2.5" HDD, one 12.7 mm compact CD-ROM drive, and one slim type 3.5" FDD

•Front panel:

IP65 protection (not for the model with SAW touchscreen)

Standard PC functions

•CPU: Supports Intel P4 and P4 Celeron up to 3.06 GHz. Also supports Hyperthreading technology at 3.06GHz.

•BIOS: Award 4 MB Flash BIOS, supports Plug & Play, APCI

•Chipset: Intel 845GV / ICH4

•2nd level cache: On-die 256 or 512 KB

•RAM: Two 184-pin DDR DIMM sockets up to 2GB DDR SDRAM

•PCI bus master IDE interface: Supports two connectors. Each con- nector has one channel and supports two IDE devices. Each channel supports PIO modes 0 ~ 4, DMA mode 0 ~ 2, and Ultra DMA 33/66/ 100 simultaneously. The secondary connector is designated for the CD- ROM drive. BIOS supports IDE CD-ROM boot-up

•Floppy disk drive: Supports up to two FDDs (720 KB / 1.44 MB). One built-in FDD included inside FDD housing

•Parallel port: One parallel port, supports SPP/EPP/ECP parallel mode. BIOS configurable to LPT1, LPT2, LPT3 or disabled

•Serial ports: Four serial ports with three RS-232 ports (COM1, 3, and 4), one RS-232/422/485 port (COM2). All ports are compatible with 16C550 UARTs

•Universal serial bus (USB) port: Supports up to four USB V2.0 ports