3.4 Multi-card Reader
Memory Flash Cards are inserted and ejected in much the same way as diskettes.
To insert a Flash Memory card, align the card with the socket and slide the card into the socket until it locks into place. Note that some Flash Memory cards must be prepared by your operating system before you can use them for data storage. See your Flash Memory card manual for details.
To eject a Flash Memory card, first ensure that the panel PC is not access- ing the memory card or device. Then press the appropriate eject button on the socket. When the card pops out of the socket, remove it and store it properly.
Figure 3.3: Opening the card reader’s door
Figure 3.4: Inserting and ejecting a PCMCIA card
| 22 |