3..
4..
When On + Mic Mute is selected, an incoming call will automatically be connected, but your voice will not be heard by the remote caller.
If you want to refuse all incoming calls, set Do not Disturb to On.
An incoming call will be indicated by a ringtone. If you want to mute the ringtone, select Audio, and set Sounds to Off.
4.3 Screen Layout
4.3 Screen Layout
The image of the remote party will appear when your call is accepted.
The 
button can be used to change the screen layout of yours and the
remote caller’s as required. Each time you press 
, the screen layout will change as shown below: The blue figure represents the remote caller, and the green figure represents you.
•In DVI or PC mode
–A call is connected
–A call is not connected
•In VC mode
–A call is connected
–A call is not connected
You can change the size and location of the smaller picture in this screen layout.
1.. Press 
to open the Setup screen, and go to Input.
◀ 29 ▶